Sender werden ignoriert / verschlüsselte Aufnahmen

[FireBird]

Danke, ist eingetrudelt. Ich werfe Abends einen Blick in die Datenbanken.

[Gerti]

Hi!

Hier der SE-Log:
Hier siehst du auch, dass beim Einschalten von Discovery auf NG umgeschaltet wurde.

Code: Alles auswählen

2011-08-19 08:59:18 ===================================================
2011-08-19 08:59:18 SmartEPG_TMS  V0.9.5b Beta
2011-08-19 08:59:18 SysID=22010(SRP-2100 (TMS)), Firmware=0x0111
2011-08-19 08:59:18 TimeZone = 60 min (+DST)
2011-08-19 08:59:19 Network: Listening on TCP port 1417
2011-08-19 08:59:19 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-19 08:59:19 ScanTimerMonitor: ScanTimer has been set to 2011-08-20 06:59
2011-08-19 08:59:19 LogoManager: 1636 cache records have been loaded
2011-08-19 08:59:19 TimerDB: DBTimer 'SmartEPG': event ID has changed from '0x0000' to '0x0ecf'
2011-08-19 08:59:19 Startreason: Timer
2011-08-19 08:59:19 Check if channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 08:59:19 Checking channel list for 1412 TV-Channels
2011-08-19 08:59:19 Checking channel list for 1301 Radio-Channels
2011-08-19 08:59:19 Channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 08:59:19 Searching for RebuildNAV/RecCopy
2011-08-19 08:59:19 RbN found at '/ProgramFiles/RebuildNAV.tap'
2011-08-19 08:59:19 Modify Timer 0 to Tuner 4
2011-08-19 08:59:19 Name: Unterwegs durchs All mit Ulrich Walter.rec
2011-08-19 08:59:19 Channel: †NatGeo‡ †HD‡
2011-08-19 08:59:19 StartTime: 09:00
2011-08-19 08:59:19 EndTime: 09:10
2011-08-19 08:59:19 Timer 0 is scheduled within 1 minute
2011-08-19 08:59:19 -------------------------------------------------------------------------------
2011-08-19 08:59:19 Processing timer 0
2011-08-19 08:59:19 Channel: †NatGeo‡ †HD‡ (6)
2011-08-19 08:59:19 Name: Unterwegs durchs All mit Ulrich Walter.rec
2011-08-19 08:59:19 Type: TV
2011-08-19 08:59:19 Reservation Type: Recording (R)
2011-08-19 08:59:19 Frequency: 11992MHz
2011-08-19 08:59:19 --------------------
2011-08-19 08:59:19 LiveTuner: 1
2011-08-19 08:59:19 LiveChannel: †Disc‡overy †HD‡ (5)
2011-08-19 08:59:19 LiveType: TV
2011-08-19 08:59:19 LiveService: Crypted
2011-08-19 08:59:19 LiveFreq: 11914MHz / LiveIDx: 1
2011-08-19 08:59:19 --------------------
2011-08-19 08:59:19 TOneFreq: 00000MHz / TOneIDx: 0
2011-08-19 08:59:19 TTwoFreq: 00000MHz / TTwoIDx: 0
2011-08-19 08:59:19 RecFreq:  11992MHz / RecIDx:  1
2011-08-19 08:59:19 (Case 11): Change Livechannel on Tuner 1 to Channel 6
2011-08-19 08:59:19 (Case 12): Modify Timer to Tuner 1 (Live Tuner)
2011-08-19 08:59:19 Timermodification successfully
2011-08-19 08:59:19 -------------------------------------------------------------------------------
2011-08-19 08:59:19 Load IQTuner Settings
2011-08-19 08:59:29 Check for conflict TAPs
2011-08-19 09:00:05 Timers changed, force new check for starting timers
2011-08-19 09:00:05 Recording of "Unterwegs durchs All mit Ulrich Walter.rec" started
2011-08-19 09:00:05 Check for crypt flag: Recording is started scrambled
2011-08-19 09:10:01 TimerDB: removed old timer '00 'Unterwegs durchs All mit Ulrich Walter - Schwarze Löcher' (2011-08-19 09:00/10')'
2011-08-19 09:10:05 Recording of "Unterwegs durchs All mit Ulrich Walter.rec" stopped
2011-08-19 09:10:05 Check for crypt flag: Recording is marked as scrambled
2011-08-19 09:11:00 Network: Shutdown event
2011-08-19 09:11:00 Network: Closing server socket
2011-08-19 09:11:00 TimerDB: deleting DB timer '03 'SmartEPG' (2011-08-20 07:00/2')'
2011-08-19 09:11:00 SE shutdown finished

Hast Du SmartEPG manuell nachgestartet oder ist der Receiver wirklich so gestartet?!

Das hier sollte nämlich eigentlich gar nicht vorkommen:

Code: Alles auswählen

2011-08-19 08:59:19 (Case 11): Change Livechannel on Tuner 1 to Channel 6
2011-08-19 08:59:19 (Case 12): Modify Timer to Tuner 1 (Live Tuner)

Bei mir ist es völlig egal, auf welchem Sender ich den Receiver ausschalte, wenn er sich einschaltet, dann steht er direkt auf dem Sender für den anstehenden Tuner.
In Deinem Fall steht er aber auf Discovery, obwohl die Aufnahme auf History startet.
Das Umschalten auf den richtigen Sender übernimmt daher IQTuner.

Falls Du es nachgestartet hast, versuche doch mal, eine Aufnahme auf History zu programmieren, dann auf Discovery umzuschalten und dann den Receiver auszuschalten.
Nun beobachte mal, was beim Einschalten für den Timer passiert.
- Auf welchem Sender startet der Receiver
- Welcher Case ist im Logfile zu sehen? Wieder 11 und 12 oder Case 2?

Gruß,
Gerti

[Kalle Anka]

Wenn ich mich recht erinnere, ist der Receiver so gestartet. Habs aber eben nochmal durchgespielt (SE im Autostart, Aufnahme bei History HD programmiert, mit Discovery HD ausgeschaltet).
Beim Booten erscheint kurz Discovery im Frontdisplay, dann schaltet er zu History.
Kein Bild/Ton, Aufnahme wieder unbrauchbar.

Hier der SE-Log:

Code: Alles auswählen

2011-08-19 14:27:18 SmartEPG_TMS  V0.9.5b Beta
2011-08-19 14:27:18 SysID=22010(SRP-2100 (TMS)), Firmware=0x0111
2011-08-19 14:27:18 TimeZone = 60 min (+DST)
2011-08-19 14:27:19 Network: Listening on TCP port 1417
2011-08-19 14:27:19 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-19 14:27:19 ScanTimerMonitor: ScanTimer has been set to 2011-08-20 06:59
2011-08-19 14:27:19 TimerDB: removed old timer '00 'HistHD' (2011-08-19 14:22/5')'
2011-08-19 14:27:19 LogoManager: 1636 cache records have been loaded
2011-08-19 14:27:19 Startreason: Timer
2011-08-19 14:27:19 Check if channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 14:27:19 Checking channel list for 1417 TV-Channels
2011-08-19 14:27:19 Checking channel list for 1301 Radio-Channels
2011-08-19 14:27:19 Channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 14:27:19 Searching for RebuildNAV/RecCopy
2011-08-19 14:27:19 RbN found at '/ProgramFiles/RebuildNAV.tap'
2011-08-19 14:27:19 Modify Timer 7 to Tuner 4
2011-08-19 14:27:19 Name: HistHD.rec
2011-08-19 14:27:19 Channel: †Hist‡ory †HD‡
2011-08-19 14:27:19 StartTime: 14:28
2011-08-19 14:27:19 EndTime: 14:33
2011-08-19 14:27:19 Timer 7 is scheduled within 1 minute
2011-08-19 14:27:19 -------------------------------------------------------------------------------
2011-08-19 14:27:19 Processing timer 7
2011-08-19 14:27:19 Channel: †Hist‡ory †HD‡ (7)
2011-08-19 14:27:19 Name: HistHD.rec
2011-08-19 14:27:19 Type: TV
2011-08-19 14:27:19 Reservation Type: Recording (R)
2011-08-19 14:27:19 Frequency: 11992MHz
2011-08-19 14:27:19 --------------------
2011-08-19 14:27:19 LiveTuner: 1
2011-08-19 14:27:19 LiveChannel: †Disc‡overy †HD‡ (5)
2011-08-19 14:27:19 LiveType: TV
2011-08-19 14:27:19 LiveService: Crypted
2011-08-19 14:27:19 LiveFreq: 11914MHz / LiveIDx: 1
2011-08-19 14:27:19 --------------------
2011-08-19 14:27:19 TOneFreq: 00000MHz / TOneIDx: 0
2011-08-19 14:27:19 TTwoFreq: 00000MHz / TTwoIDx: 0
2011-08-19 14:27:19 RecFreq:  11992MHz / RecIDx:  1
2011-08-19 14:27:19 (Case 11): Change Livechannel on Tuner 1 to Channel 7
2011-08-19 14:27:19 (Case 12): Modify Timer to Tuner 1 (Live Tuner)
2011-08-19 14:27:19 Timermodification successfully
2011-08-19 14:27:19 -------------------------------------------------------------------------------
2011-08-19 14:27:19 Load IQTuner Settings
2011-08-19 14:27:29 Check for conflict TAPs
2011-08-19 14:28:05 Timers changed, force new check for starting timers
2011-08-19 14:28:05 Recording of "†Hist‡ory †HD‡.rec" started
2011-08-19 14:28:05 Check for crypt flag: Recording is started scrambled
2011-08-19 14:32:55 User interaction detected, change into Activemode
2011-08-19 14:33:01 TimerDB: removed old timer '01 'HistHD' (2011-08-19 14:28/5')'
2011-08-19 14:33:04 Recording of "†Hist‡ory †HD‡.rec" stopped
2011-08-19 14:33:04 Check for crypt flag: Recording is marked as scrambled

Und hier das TimerDiag-Log:

Code: Alles auswählen

2011-08-19 14:27:19 TimerDiags: TimerDiags V3.4b has been launched
2011-08-19 14:27:19 TimerDiags: SysID=22010(SRP-2100 (TMS)), Firmware=0x0111, Uptime=1072
2011-08-19 14:27:19 TimerDiags: Bootreason = Timer
2011-08-19 14:27:19 TimerDiags: CHECKRECMONITOREXTDISK disabled
2011-08-19 14:27:19 TimerDiags: CHECKKEYEVENT disabled
2011-08-19 14:27:20 TimerDiags: Current channel: †Hist‡ory †HD‡ (T) @ Tuner 1
2011-08-19 14:27:20 TimerDiags: TunerMon: T1 carrier lost
2011-08-19 14:27:20 TimerDiags: TunerMon: T1 signal lost
2011-08-19 14:27:20 TimerDiags: TunerMon: T2 carrier lost
2011-08-19 14:27:20 TimerDiags: TunerMon: T2 signal lost
2011-08-19 14:27:20 TimerDiags: TAP Running: 'SmartEPG_TMS V0.9.5b Beta' (Slot=0)
2011-08-19 14:27:20 TimerDiags: TAP Running: 'TimerDiags V3.4b' (Slot=1)
2011-08-19 14:27:20 TimerDiags: TAP Running: 'dbfit 2.91' (Slot=2)
2011-08-19 14:27:20 TimerDiags: Recording disk = internal
2011-08-19 14:27:20 TimerDiags: Free space on internal disk is 380 GB
2011-08-19 14:27:21 TimerDiags: TunerMon: T1 carrier OK
2011-08-19 14:27:21 TimerDiags: TunerMon: T1 signal OK
2011-08-19 14:27:21 TimerDiags: Service State: PID 0x02ff @ Main = ERROR
2011-08-19 14:27:21 TimerDiags: Service State: PID 0x0303 @ Main = ERROR
2011-08-19 14:27:22 TimerDiags: Service State: PID 0x02ff @ Main = ERROR
2011-08-19 14:27:22 TimerDiags: Service State: PID 0x0303 @ Main = ERROR
2011-08-19 14:28:04 TimerDiags: Removed timer: 2011-08-19 14:28 HistHD.rec (†Hist‡ory †HD‡) [r1] (5')
2011-08-19 14:28:04 TimerDiags: Started REC  : †Hist‡ory †HD‡.rec (†Hist‡ory †HD‡) [T1]
2011-08-19 14:28:06 TimerDiags: RECMON: New REC '//DataFiles/†Hist‡ory †HD‡.rec' (dev=2050, inode=5157)
2011-08-19 14:33:05 TimerDiags: Stopped REC  : †Hist‡ory †HD‡.rec (†Hist‡ory †HD‡)

[Maliboy]

Hi Firebird,

keine Ahnung, ob der Effekt evtl. auch bei SE zutrifft, aber mit JAG hatte ich den Effekt, das die Entschlüsselung erst eingesetzt hat, nachdem ich JAG ausgeblendet hatte. Da SE sich eigentlich beim Starten nicht einblendet, sollte das nicht das gleiche Problem sein, aber das war damals der Grund, warum ich JAG mit dem XStart Tap verzögert gestartet habe.

[FireBird]

Stimmt, dass ein TAP die Entschlüsselung blocken kann, aber, wie Du richtig sagst, blendet SE nichts ein und es handelt sich scheinbar um einen Einzelfall – zumindest habe ich bisher von keinem derartigen Fall gehört.

@Kalle: aktuell tendiere ich zu einem Problem mit den Settings. Seltsam ist z.B., dass Dein Astra laut Settings bei 18,5°E stehen soll. Bei lyngsat weiß man nichts von so einem Sat. Das ist zwar kein grundsätzliches Problem, schließt Dich aber aus den TopList-Empfehlungen aus. Da auch Hotbird um 0,7° daneben liegt (12,3°E), hat das vielleicht einen höheren Grund?

Es wäre jedenfalls einen Versuch wert, andere (z.B. bukos) Settings zu testen. Mittels BackupSettings-TAP lassen sich diese schnell untereinander tauschen. Zusätzlich musst Du ein zweites SmartEPG-Settings-Verzeichnis anlegen und das den Settings entsprechende Verzeichnis aktivieren, damit der aktuelle Zustand einfach wiederherstellbar bleibt.

[Gerti]

Hi!

Sehe ich ähnlich. Sieht wirklich nach einem Settingsproblem aus.
Vielleicht einfach mal einen Werksreset machen und den Receiver mit den vorprogrammieren Settings testen.

Gruß,
Gerti

[Kalle Anka]

Die Sat-Positionen habe ich verstellt, da die Antenne am Mast nicht ganz korrekt ausgerichtet ist, daher korrigiere ich die Position mit dem USALS-Motor. Dürfte nichts mit dem Problem zu tun haben.
Werde aber mal Reset und neue Settings ausprobieren.

[FireBird]

da die Antenne am Mast nicht ganz korrekt ausgerichtet ist

Na geht schon los. Glaube ich auch nicht, aber vielleicht bist Du wirklich der erste mit dieser Kombination.

[Kalle Anka]

Ok, es liegt am USALS.
Habe einen Werksreset gemacht, Bukos Settings eingespielt und ohne weitere Änderungen eine Test-Timeraufnahme gemacht. Funktioniert einwandfrei.
Dann habe ich Disecq 1.3 aktiviert und schon habe ich wieder die Probleme.
Disecq 1.3 wieder aus und Aufnahme wieder ok.
Hier gibt es wohl nicht so viele User mit motorisierter Schüssel?!

Hier das Log (3 Tests, ohne/mit/ohne USALS):

Code: Alles auswählen

2011-08-19 16:19:19 SmartEPG_TMS  V0.9.5b Beta
2011-08-19 16:19:19 SysID=22010(SRP-2100 (TMS)), Firmware=0x0111
2011-08-19 16:19:19 TimeZone = 60 min (+DST)
2011-08-19 16:19:19 Network: Listening on TCP port 1417
2011-08-19 16:19:19 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-19 16:19:20 ScanTimerMonitor: ScanTimer has been set to 2011-08-20 06:59
2011-08-19 16:19:20 LogoManager: 1636 cache records have been loaded
2011-08-19 16:19:20 Startreason: Timer
2011-08-19 16:19:20 Check if channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 16:19:20 Checking channel list for 314 TV-Channels
2011-08-19 16:19:20 Checking channel list for 146 Radio-Channels
2011-08-19 16:19:20 Channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 16:19:20 Searching for RebuildNAV/RecCopy
2011-08-19 16:19:20 RbN found at '/ProgramFiles/RebuildNAV.tap'
2011-08-19 16:19:20 Modify Timer 0 to Tuner 4
2011-08-19 16:19:20 Name: HistHD.rec
2011-08-19 16:19:20 Channel: †Hist‡ory †HD‡
2011-08-19 16:19:20 StartTime: 16:20
2011-08-19 16:19:20 EndTime: 16:25
2011-08-19 16:19:20 Timer 0 is scheduled within 1 minute
2011-08-19 16:19:20 -------------------------------------------------------------------------------
2011-08-19 16:19:20 Processing timer 0
2011-08-19 16:19:20 Channel: †Hist‡ory †HD‡ (44)
2011-08-19 16:19:20 Name: HistHD.rec
2011-08-19 16:19:20 Type: TV
2011-08-19 16:19:20 Reservation Type: Recording (R)
2011-08-19 16:19:20 Frequency: 11992MHz
2011-08-19 16:19:20 --------------------
2011-08-19 16:19:20 LiveTuner: 1
2011-08-19 16:19:20 LiveChannel: †Hist‡ory †HD‡ (44)
2011-08-19 16:19:20 LiveType: TV
2011-08-19 16:19:20 LiveService: Crypted
2011-08-19 16:19:20 LiveFreq: 11992MHz / LiveIDx: 1
2011-08-19 16:19:20 --------------------
2011-08-19 16:19:20 TOneFreq: 00000MHz / TOneIDx: 0
2011-08-19 16:19:20 TTwoFreq: 00000MHz / TTwoIDx: 0
2011-08-19 16:19:20 RecFreq:  11992MHz / RecIDx:  1
2011-08-19 16:19:20 (Case 2): Modify Timer to Tuner 1 (Live Tuner)
2011-08-19 16:19:20 Timermodification successfully
2011-08-19 16:19:20 -------------------------------------------------------------------------------
2011-08-19 16:19:20 Load IQTuner Settings
2011-08-19 16:19:30 Check for conflict TAPs
2011-08-19 16:20:01 Recording of "Mega Movers.rec" started
2011-08-19 16:20:01 Check for crypt flag: Recording is started descrambled
2011-08-19 16:21:16 User interaction detected, change into Activemode
2011-08-19 16:21:18 Recording of "Mega Movers.rec" stopped
2011-08-19 16:21:18 Check for crypt flag: Recording is marked as descrambled
2011-08-19 16:21:18 TimerDB: DBTimer '00 'HistHD' (2011-08-19 16:20/5')' is not recording any more, blocking
2011-08-19 16:22:56 TimerDB: Timer '15 'HistHD' (2011-08-19 16:25/5')' has been added to the db
2011-08-19 16:22:56 Timers changed, force new check for starting timers
2011-08-19 16:23:04 TimerDB: DBTimer 'HistHD': start time has changed from '2011-08-19 16:25' to '2011-08-19 16:26'
2011-08-19 16:23:09 Network: Shutdown event
2011-08-19 16:23:09 Network: Closing server socket
2011-08-19 16:23:09 TimerDB: deleting DB timer '03 'SmartEPG' (2011-08-20 07:00/2')'
2011-08-19 16:23:10 SE shutdown finished
2011-08-19 16:25:18 ===================================================
2011-08-19 16:25:18 SmartEPG_TMS  V0.9.5b Beta
2011-08-19 16:25:18 SysID=22010(SRP-2100 (TMS)), Firmware=0x0111
2011-08-19 16:25:18 TimeZone = 60 min (+DST)
2011-08-19 16:25:18 Network: Listening on TCP port 1417
2011-08-19 16:25:18 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-19 16:25:19 ScanTimerMonitor: ScanTimer has been set to 2011-08-20 06:59
2011-08-19 16:25:19 TimerDB: removed old timer '00 'HistHD' (2011-08-19 16:20/5')'
2011-08-19 16:25:19 LogoManager: 1636 cache records have been loaded
2011-08-19 16:25:19 Startreason: Timer
2011-08-19 16:25:19 Check if channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 16:25:19 Checking channel list for 314 TV-Channels
2011-08-19 16:25:19 Checking channel list for 146 Radio-Channels
2011-08-19 16:25:19 Channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 16:25:19 Searching for RebuildNAV/RecCopy
2011-08-19 16:25:19 RbN found at '/ProgramFiles/RebuildNAV.tap'
2011-08-19 16:25:19 Modify Timer 0 to Tuner 4
2011-08-19 16:25:19 Name: HistHD.rec
2011-08-19 16:25:19 Channel: †Hist‡ory †HD‡
2011-08-19 16:25:19 StartTime: 16:26
2011-08-19 16:25:19 EndTime: 16:31
2011-08-19 16:25:19 Timer 0 is scheduled within 1 minute
2011-08-19 16:25:19 -------------------------------------------------------------------------------
2011-08-19 16:25:19 Processing timer 0
2011-08-19 16:25:19 Channel: †Hist‡ory †HD‡ (44)
2011-08-19 16:25:19 Name: HistHD.rec
2011-08-19 16:25:19 Type: TV
2011-08-19 16:25:19 Reservation Type: Recording (R)
2011-08-19 16:25:19 Frequency: 11992MHz
2011-08-19 16:25:19 --------------------
2011-08-19 16:25:19 LiveTuner: 1
2011-08-19 16:25:19 LiveChannel: Discovery HD (45)
2011-08-19 16:25:19 LiveType: TV
2011-08-19 16:25:19 LiveService: Crypted
2011-08-19 16:25:19 LiveFreq: 11914MHz / LiveIDx: 1
2011-08-19 16:25:19 --------------------
2011-08-19 16:25:19 TOneFreq: 00000MHz / TOneIDx: 0
2011-08-19 16:25:19 TTwoFreq: 00000MHz / TTwoIDx: 0
2011-08-19 16:25:19 RecFreq:  11992MHz / RecIDx:  1
2011-08-19 16:25:19 (Case 11): Change Livechannel on Tuner 1 to Channel 44
2011-08-19 16:25:19 (Case 12): Modify Timer to Tuner 1 (Live Tuner)
2011-08-19 16:25:19 Timermodification successfully
2011-08-19 16:25:19 -------------------------------------------------------------------------------
2011-08-19 16:25:19 Load IQTuner Settings
2011-08-19 16:25:25 TimerDB: DBTimer 'HistHD': ChannelID has changed from '0x00c0008500060071' to '0x44c21e3000000001'
2011-08-19 16:25:29 Check for conflict TAPs
2011-08-19 16:26:04 User interaction detected, change into Activemode
2011-08-19 16:26:05 Timers changed, force new check for starting timers
2011-08-19 16:26:05 Recording of "†Hist‡ory †HD‡.rec" started
2011-08-19 16:26:05 Check for crypt flag: Recording is started scrambled
2011-08-19 16:26:10 Recording of "†Hist‡ory †HD‡.rec" stopped
2011-08-19 16:27:01 TimerDB: DBTimer '00 'HistHD' (2011-08-19 16:26/5')' is not recording any more, blocking
2011-08-19 16:27:10 TimerDB: Timer '15 'HistHD' (2011-08-19 16:30/5')' has been added to the db
2011-08-19 16:27:11 Timers changed, force new check for starting timers
2011-08-19 16:27:15 Network: Shutdown event
2011-08-19 16:27:15 Network: Closing server socket
2011-08-19 16:27:15 TimerDB: deleting DB timer '03 'SmartEPG' (2011-08-20 07:00/2')'
2011-08-19 16:27:16 SE shutdown finished
2011-08-19 16:29:19 ===================================================
2011-08-19 16:29:19 SmartEPG_TMS  V0.9.5b Beta
2011-08-19 16:29:19 SysID=22010(SRP-2100 (TMS)), Firmware=0x0111
2011-08-19 16:29:19 TimeZone = 60 min (+DST)
2011-08-19 16:29:19 Network: Listening on TCP port 1417
2011-08-19 16:29:19 Network: Failed to send UDP bytes to client '192.168.0.1:22222'
2011-08-19 16:29:20 ScanTimerMonitor: ScanTimer has been set to 2011-08-20 06:59
2011-08-19 16:29:20 LogoManager: 1636 cache records have been loaded
2011-08-19 16:29:20 Startreason: Timer
2011-08-19 16:29:20 Check if channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 16:29:20 Checking channel list for 314 TV-Channels
2011-08-19 16:29:20 Checking channel list for 146 Radio-Channels
2011-08-19 16:29:20 Channel lists of Tuner 1 and Tuner 2 are matching
2011-08-19 16:29:20 Searching for RebuildNAV/RecCopy
2011-08-19 16:29:20 RbN found at '/ProgramFiles/RebuildNAV.tap'
2011-08-19 16:29:20 Modify Timer 0 to Tuner 4
2011-08-19 16:29:20 Name: HistHD.rec
2011-08-19 16:29:20 Channel: †Hist‡ory †HD‡
2011-08-19 16:29:20 StartTime: 16:30
2011-08-19 16:29:20 EndTime: 16:35
2011-08-19 16:29:20 Timer 0 is scheduled within 1 minute
2011-08-19 16:29:20 -------------------------------------------------------------------------------
2011-08-19 16:29:20 Processing timer 0
2011-08-19 16:29:20 Channel: †Hist‡ory †HD‡ (44)
2011-08-19 16:29:20 Name: HistHD.rec
2011-08-19 16:29:20 Type: TV
2011-08-19 16:29:20 Reservation Type: Recording (R)
2011-08-19 16:29:20 Frequency: 11992MHz
2011-08-19 16:29:20 --------------------
2011-08-19 16:29:20 LiveTuner: 1
2011-08-19 16:29:20 LiveChannel: †Hist‡ory †HD‡ (44)
2011-08-19 16:29:20 LiveType: TV
2011-08-19 16:29:20 LiveService: Crypted
2011-08-19 16:29:20 LiveFreq: 11992MHz / LiveIDx: 1
2011-08-19 16:29:20 --------------------
2011-08-19 16:29:20 TOneFreq: 00000MHz / TOneIDx: 0
2011-08-19 16:29:20 TTwoFreq: 00000MHz / TTwoIDx: 0
2011-08-19 16:29:20 RecFreq:  11992MHz / RecIDx:  1
2011-08-19 16:29:20 (Case 2): Modify Timer to Tuner 1 (Live Tuner)
2011-08-19 16:29:20 Timermodification successfully
2011-08-19 16:29:20 -------------------------------------------------------------------------------
2011-08-19 16:29:20 Load IQTuner Settings
2011-08-19 16:29:22 TimerDB: DBTimer 'HistHD': ChannelID has changed from '0x00c00085000d0071' to '0x44c21e3000000001'
2011-08-19 16:29:30 Check for conflict TAPs